Mcz Philo Bedienungsanleitung PDF herunterladen (Seite 23)

PELLET STOVES Chapter 3

USE AND MAINTENANCE MANUAL

page 23

3.5. FITTING THE CLADDING

3.5.1. Fitting the front panels and grilles

The stove is supplied with the top, grilles and front panels packaged

separately. Therefore, unpack everything before beginning to assemble

the appliance.

Fit the front panels as follows:

 Take panel A and fit it into the pins located at the bottom of

the stove. Fasten the panel to the structure using the screws

provided (two screws on the right and two on the left. The

panel must be secured centrally. Open the door and place

two more screws at the bottom). The screws to position in

the centre (underneath the door) are black.

 At this point, fasten panel B using the same method. The

panel should fit into the pins on the underpart of the stove

and be fastened to the structure in the central part, under

the door, with two screws (again, black). At the top of the

panel there are two springs that lock into a groove on the

structure.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Keine Kommentare

Mcz Philo Bedienungsanleitung Seite 23